Rochester 6200 Series LPG Measuring Equipment Level Gauge

Rochester 6200 Series Technical Features:

The 6200 series gauges are widely used to indicate liquid levels of fuels, hydraulic fluids, lube oils, liquified gases such as propane, butane, ammonia etc… The 6200 series gauges are used for tank diameter up to 2000mm and tank pressure up to 25 bar. Float is counterbalanced for low specific gravity fluids. Gauge can be equipped with direct reading dial, twin-site or switch.

Mounting Position
Gauges of serie 6200 can be manufactured for any mounting position.
Vertical : top mounted 1
Horizontal : end mounted 2
Horizontal : side mounted 3
Angle : angle mounted 4 (angle for angle mounted gauge is specified from horizontal, positive above horizontal, negative below horizontal)

Certification
Those gauges serie 6200 are in accordance with European Directive PED 97/23/CE for LPG, ammonia for maximum pressure 25 bar and temperature –20° to + 60°C.
Others: on request after risk analysis.
They have been certified by APRAGAZ, notified body 0029, under n° 02/BE/329.

Junior Models (1-5/8″ Dial):
6281: For top-mount applications; equipped with a standard magnet to drive a direct-reading dial.
6284: For side, end, and angled tank installations; otherwise same as model 6281.
6241: For top-mount applications; equipped with a stronger magnet to drive a transmitter.
6244: For side, end, and angled tank installations; otherwise same as model 6241.
B6244: Same as model 6244 but with a brass head.

Senior Models (2″ Dial):
6280: For top-mount applications; equipped with a standard magnet to drive a direct-reading dial.
6283: For side, end, and angled tank installations; otherwise same as model 6280.
6290: For top-mount applications; equipped with a stronger magnet to drive a large 4″ dial.
6293: For side, end, and angled tank installations; otherwise same as model 6290.

Rochester 6200 series tank level gauge parameter table:

Model	Dial	Mounting Position	Application Range
6280–Rod Length–Internal Diameter	2"	Top of the tank	For tanks with internal diameter and rod length not exceeding 2 meters
6290–Rod Length–Internal Diameter	4"
6283–Internal Diameter	2"	side, end, or angle mount
6293–Internal Diameter	4"

*If the above models need to be equipped with remote transmission instruments, please use 7290/7293 remote voltage transmitter